If you have been reading about solubility and want a single page that covers the useful parts, this is it: definitions, context, how it is studied, and the questions that come up repeatedly.
Last reviewed on 2025-12-18. Where a claim depends on a specific study, the study is described rather than over-claimed.
Reconstitution involves adding a solvent to dry peptide, often water or a buffered solution. The chosen liquid should match the peptide's solubility and intended assay, and it should be free of contaminants. Gentle mixing or inversion reduces foaming and shear, which can damage some peptides. If the peptide does not dissolve readily, adjusting pH or using a small amount of organic co-solvent may help. The final solution is typically clarified before use in analytical or laboratory procedures.
After reconstitution, solutions are usually divided into single-use aliquots to limit repeated handling. Each aliquot is stored at a temperature appropriate for the peptide, with -20 °C or -80 °C common for longer-term laboratory storage. Freeze-thaw cycles are minimized because they can cause aggregation, precipitation, or loss of activity. Temperature monitoring and documented storage conditions support reproducibility across experiments. When a peptide is removed from storage, it is typically allowed to equilibrate before opening to reduce condensation.
Cold-chain practice relies on documented temperature ranges, calibrated monitoring, and minimized excursions. Shipments may use insulated boxes, phase-change materials, or dry ice, with data loggers to record conditions. Upon receipt, the recipient should verify the logger trace and place items into long-term storage promptly. Repeated warming and cooling during transfers can be more harmful than a single controlled excursion. For solutions, dividing material into single-use aliquots reduces the number of thawing and refreezing events and limits repeated opening of the same container.
Handling begins before a peptide arrives at the bench. Containers should be inspected for cracks, loose caps, or visible moisture, and labels should record identity, lot, and receipt date. Lyophilized material is often allowed to equilibrate to room temperature before opening to prevent condensation on the powder. Gloves and a clean workspace reduce contamination and static-related loss. Once opened, the vial may be purged with inert gas and resealed if the peptide is sensitive to oxygen or humidity. These steps are procedural safeguards rather than guarantees of stability.
| Property | Value | Notes |
|---|---|---|
| Container material | Glass or inert plastic | Compatibility depends on peptide and solvent |
| Headspace gas | Nitrogen or argon | Used to limit oxygen exposure |
| Common reconstitution solvent | Water or buffered aqueous solution | Organic co-solvents may be needed for hydrophobic peptides |
| Freeze-thaw stability | Varies by peptide | Aliquoting reduces repeated cycles |
| Documentation | Lot, date, concentration, storage location | Supports traceability and reproducibility |
After reconstitution, solutions are usually divided into single-use aliquots to avoid repeated freeze-thaw cycles. Aliquots should be labeled with peptide identity, concentration, solvent, and date, then stored at the temperature specified by the supplier or protocol. Many peptides tolerate -20 °C for short periods, while -80 °C is preferred for longer storage. Frost-free freezers are generally avoided because temperature fluctuations can stress samples. Aseptic technique and sterile filters reduce microbial contamination, though filtration can also remove aggregated material or bind some peptides.
Peptide handling begins with careful receipt and inventory. Containers should be inspected for damage, label information should match the certificate of analysis, and storage location should be recorded. Many lyophilized peptides are electrostatic and may cling to vial walls or weighing paper, which can complicate transfer. Allowing a cold vial to equilibrate to room temperature before opening reduces condensation on the contents. Clean tools, gloves, and a low-humidity workspace limit contamination and moisture exposure during manipulation.
Reconstitution introduces new variables. The solvent should match the peptide's solubility profile, and water or buffer quality matters because trace metals and microbes can alter results. Adding solvent gently down the vial wall minimizes foaming, which can denature some sequences. Mixing by gentle inversion or swirling is usually preferred over vigorous vortexing. If a peptide does not dissolve readily, adjusting pH or using a small amount of organic co-solvent may help, but such steps can also affect stability and should be documented.
Quality control links handling to measurable identity and purity. Reverse-phase high-performance liquid chromatography can separate peptide variants and reveal impurities. Mass spectrometry confirms molecular mass and can detect truncations or modifications. These methods are often paired with ultraviolet absorbance or amino acid analysis for concentration. Documentation of instrument settings, column type, and reference standards supports reproducibility. For research materials, acceptance criteria depend on the intended application, and no universal purity threshold applies to all peptides.
Handling begins when a peptide container is opened. Hygroscopic solids can absorb atmospheric water rapidly, so bench work should be brief and containers resealed with fresh desiccant. Weighing or transferring should occur in a low-humidity environment where possible. Static electricity may cause fine powders to cling to surfaces, leading to inaccurate mass measurements. Tools such as antistatic devices or grounded workstations reduce that problem. Good laboratory practice also includes labeling date, lot, and storage condition after each opening.
Receiving a peptide shipment requires immediate inspection of the packaging and temperature indicators. Any deviation from the specified cold chain should be documented and investigated. Upon arrival, solid peptides are generally kept at -20°C, whereas liquid formulations are stored at -80°C. Vials should be kept upright and protected from light. Repeated warming and cooling of the entire container is avoided by preparing smaller working aliquots. A log of lot numbers, receipt dates, and storage locations supports traceability and quality control.
Reconstitution is a critical handling step. The appropriate solvent—often sterile water, phosphate-buffered saline, or a water-acetonitrile mixture—is chosen based on peptide solubility. Adding solvent gently down the vial wall and swirling, rather than vortexing, reduces foaming and shear stress. The resulting solution should be clear; visible particles indicate incomplete dissolution or contamination. Concentration is recorded accurately because it affects subsequent use. If the peptide is not fully soluble, a small amount of organic solvent or a different buffer may be required, but this changes the final composition.
An alpha helix (or α-helix) is a sequence of amino acids in a protein that are twisted into a coil (a helix). The alpha helix is the most common structural arrangement in the secondary structure of proteins. It is also the most extreme type of local structure, and it is the local structure that is most easily predicted from a sequence of amino acids. The alpha helix has a right-handed helix conformation in which every backbone N−H group hydrogen bonds to the backbone C=O group of the amino acid that is four residues earlier in the protein sequence. The alpha helix is also commonly called a: Pauling–Corey–Branson α-helix (from the names of three scientists who described its structure) 3.613-helix because there are 3.6 amino acids in one ring, with 13 atoms being involved in the ring formed by the hydrogen bond (starting with amidic hydrogen and ending with carbonyl oxygen)
Formation of the Quinonoid Intermediate PLP acts as an 'electron sink' absorbing delocalized electron density during the reaction intermediates (countering the excess electron density on the deprotonated a-carbon). PLP facilitates the enzyme activity, increasing the acidity of the alpha carbon by stabilizing the conjugate base. The PLP-stabilized carbanion intermediate formed is the quinonoid intermediate. Tyrosine and PLP stabilized 3C-Ring formation PLP and Tyrosine stabilize negative charges during deprotonation. Tyrosine attacks the sulfur bound carbon, allowing S(CH3)(Ado) to leave, and during ring formation, Tyrosine leaves. Note inhibitors AVG and AMA bind PLP to form a ketimine and oxime respectively (whose reverse reactions are much less favorable) and prevent the ACC synthase catalyzed reaction with SAM.
The predecessor to the CAD, termed an evaporative electrical detector, was first described by Kaufman in 2002 at TSI Inc in US patent 6,568,245 and was based on the coupling of liquid chromatographic approaches to TSI's electrical aerosol measurement (EAM) technology. At around the same time Dixon and Peterson at California State University were investigating the coupling of liquid chromatography to an earlier version of TSI's EAM technology, which they called an aerosol charge detector. Subsequent collaboration between TSI and ESA Biosciences Inc. (now part of Thermo Fisher Scientific), led to the first commercial instrument, the Corona CAD, which received both the Pittsburgh Conference Silver Pittcon Editor's Award (2005) and R&D 100 award (2005). Continued research and engineering improvements in product design resulted in CADs with ever increasing capabilities. The newest iterations of the CAD are the Thermo Scientific Corona Veo Charged Aerosol Detector, Corona Veo RS Charged Aerosol Detector and Thermo Scientific Vanquish Charged Aerosol Detectors.
The amino acids that make up a particular helix can be plotted on a helical wheel, a representation that illustrates the orientations of the constituent amino acids (see the article for leucine zipper for such a diagram). Often in globular proteins, as well as in specialized structures such as coiled-coils and leucine zippers, an α-helix will exhibit two "faces" – one containing predominantly hydrophobic amino acids oriented toward the interior of the protein, in the hydrophobic core, and one containing predominantly polar amino acids oriented toward the solvent-exposed surface of the protein. Changes in binding orientation also occur for facially-organized oligopeptides. This pattern is especially common in antimicrobial peptides, and many models have been devised to describe how this relates to their function. Common to many of them is that the hydrophobic face of the antimicrobial peptide forms pores in the plasma membrane after associating with the fatty chains at the membrane core.
Founded in 1984, Bio-Synthesis, Inc. was known as OCS Laboratories and was one of the first companies providing commercially available synthetic oligonucleotides to the biomedical research community worldwide. It was the first producer of commercially available synthetic DNA and became a producer of synthetic peptides in 1985, and became the only company to provide both synthetic DNA and peptide under one roof. Also in 1985 the process, now known as PCR, was discovered by Mullis et al. A key activity for Bio-Synthesis was to synthesize large number of PCR primer thus assisting and solidifying the early adoption of this now common and crucial process in biology.
Sources: en.wikipedia.org
The only drug currently approved for stroke treatment is tPA, which can cause dangerous brain bleeding. In 2005, Griffin et al proposed using Activated Protein C in conjunction with tPA to protect the brain from tPA’s harmful side-effects. APC activates protease-activated receptor 1 (PAR-1), which plays a role in the interaction of coagulation and inflammation. The 3K3A-APC was designed to have more activity at protease-activated receptor 1 (PAR-1) and less anticoagulative effect than activated protein C. The phase 2 trial, RHAPSODY, was performed in the lab of Berislav Zlokovic, the scientific founder of ZZ Biotech, to determine safety and tolerability of the drug. A phase 3 $30 million trial, RHAPSODY-2, was planned to determine safety and efficacy for treatment of ischemic stroke. However, on November 16, 2023, the National Institutes of Health (NIH) paused the start of the human trial of 3K3A-APC after an investigation by Science Magazine.
14-3-3 proteins play an isoform-specific role in class switch recombination. They are believed to interact with the protein activation-induced cytidine deaminase in mediating class switch recombination. Phosphorylation of Cdc25C by CDS1 and CHEK1 creates a binding site for the 14-3-3 family of phosphoserine binding proteins. Binding of 14-3-3 has little effect on Cdc25C activity, and it is believed that 14-3-3 regulates Cdc25C by sequestering it to the cytoplasm, thereby preventing the interactions with CycB-Cdk1 that are localized to the nucleus at the G2/M transition. The eta isoform, YWHAH, is reported to be a biomarker (in synovial fluid) for rheumatoid arthritis. In a systematic review, 14-3-3η has been described as a welcome addition to the rheumatology field. The authors indicate that the serum based 14-3-3η marker is additive to the armamentarium of existing tools available to clinicians, and that there is adequate clinical evidence to support its clinical benefits in the management of patients diagnosed with rheumatoid arthritis (RA). 14-3-3 proteins bind to and sequester the transcriptional coregulators YAP/TAZ to the cytoplasm, inhibiting their function.
Casokinins and lactokinins, breakdown products of casein and whey, occur naturally after ingestion of milk products, especially cultured milk. Their role in blood pressure control is uncertain. The lactotripeptides Val-Pro-Pro and Ile-Pro-Pro produced by the probiotic Lactobacillus helveticus or derived from casein have been shown to have ACE-inhibiting and antihypertensive functions. In one study, L. helveticus PR4 was isolated from Italian cheeses.
In the European Union, a biological medicinal product is one of the active substance(s) produced from or extracted from a biological (living) system, and requires, in addition to physicochemical testing, biological testing for full characterisation. The characterisation of a biological medicinal product is a combination of testing the active substance and the final medicinal product together with the production process and its control. For example: Production process – it can be derived from biotechnology or from other technologies. It may be prepared using more conventional techniques as is the case for blood or plasma-derived products and a number of vaccines. Active substance – consisting of entire microorganisms, mammalian cells, nucleic acids, proteinaceous, or polysaccharide components originating from a microbial, animal, human, or plant source. Mode of action – therapeutic and immunological medicinal products, gene transfer materials, or cell therapy materials.
Sedimentation equilibrium experiments reports the molar mass of analytes and their chemical equilibrium constants. The rotor speed is adjusted such that a steady-state concentration profile c(r) of the sample in the cell is formed, where sedimentation and diffusion cancel out each other. Ultracentrifuge Gas centrifuge Theodor Svedberg Differential centrifugation Buoyant density ultracentrifugation Zippe-type centrifuge Reversible Associations in Structural and Molecular Biology (RASMB -an Analytical Ultracentrifugation Forum) Analytical Ultracentrifugation as a Contemporary Biomolecular Research Tool. Archived 2002-08-04 at the Wayback Machine Gilbert-Jenkins theory Archived 2007-05-01 at the Wayback Machine Report on an ultracentrifuge explosion.
Sources: en.wikipedia.org
The amino acids in an α-helix are arranged in a right-handed helical structure where each amino acid residue corresponds to a 100° turn in the helix (i.e., the helix has 3.6 residues per turn), and a translation of 1.5 Å (0.15 nm) along the helical axis. Dunitz describes how Pauling's first article on the theme in fact shows a left-handed helix, the enantiomer of the true structure. Short pieces of left-handed helix sometimes occur with a large content of achiral glycine amino acids, but are unfavorable for the other normal, biological L-amino acids. The pitch of the alpha-helix (the vertical distance between consecutive turns of the helix) is 5.4 Å (0.54 nm), which is the product of 1.5 and 3.6. The most important thing is that the N-H group of one amino acid forms a hydrogen bond with the C=O group of the amino acid four residues earlier; this repeated i + 4 → i hydrogen bonding is the most prominent characteristic of an α-helix. Official international nomenclature specifies two ways of defining α-helices, rule 6.2 in terms of repeating φ, ψ torsion angles (see below) and rule 6.3 in terms of the combined pattern of pitch and hydrogen bonding. The α-helices can be identified in protein structure using several computational methods, such as DSSP (Define Secondary Structure of Protein).
The cytoskeleton is found underlying the cell membrane in the cytoplasm and provides a scaffolding for membrane proteins to anchor to, as well as forming organelles that extend from the cell. Indeed, cytoskeletal elements interact extensively and intimately with the cell membrane. Anchoring proteins restricts them to a particular cell surface—for example, the apical surface of epithelial cells that line the vertebrate gut—and limits how far they may diffuse within the bilayer. The cytoskeleton is able to form appendage-like organelles, such as cilia, which are microtubule-based extensions covered by the cell membrane, and filopodia, which are actin-based extensions. These extensions are ensheathed in membrane and project from the surface of the cell in order to sense the external environment and/or make contact with the substrate or other cells. The apical surfaces of epithelial cells are dense with actin-based finger-like projections known as microvilli, which increase cell surface area and thereby increase the absorption rate of nutrients. Localized decoupling of the cytoskeleton and cell membrane results in formation of a bleb.
The Swiss company GlycArt Biotechnology developed a system using CHO cells, where the cells were engineered to overexpress an enzyme called GnTIII. The effect of this overexpression is to block the formation of fucosylated oligosaccharides on the expressed antibodies. This technology was first reported in 1999 and was the basis of GlycArt Biotechnology. Roche acquired GlycArt in 2005 in order to acquire technology to afucosylate antibodies. GlycArt Biotechnology had been founded in 2000 as a spin-out company of the Swiss Federal Institute of Technology in Zurich. The first commercial product from the GlycArt acquisition was obinutuzumab, which as Gazyva gained FDA approval in November 2013 for the treatment of chronic lymphocytic leukemia. Kyowa Hakko Kirin's "Potelligent" platform uses a CHO cell line in which FUT8 has been knocked out, and which produces antibodies with little to no fucose in the Fc region. The company gained marketing approval in Japan in April 2012 for a monoclonal antibody drug called mogamulizumab which was developed using the platform. The Company's technology was first reported in 2004.
Arrestins (abbreviated Arr) are a small family of proteins important for regulating signal transduction at G protein-coupled receptors. Arrestins were first discovered in the late '80s as a part of a conserved two-step mechanism for regulating the activity of G protein-coupled receptors (GPCRs) in the visual rhodopsin system by Hermann Kühn, Scott Hall, and Ursula Wilden and in the β-adrenergic system by Martin J. Lohse and co-workers.
Sources: en.wikipedia.org
Dry peptides are generally kept in sealed, desiccated containers at low temperature, often -20 °C or colder. Protection from light, moisture, and oxygen helps slow degradation. The exact condition depends on the peptide sequence and supplier guidance.
Aliquoting divides a solution into smaller portions so that each portion is handled once. This reduces repeated freeze-thaw cycles and limits contamination risk. It also makes it easier to track usage and maintain consistent test conditions.
Refreezing is possible for some peptides but can promote aggregation or precipitation. The effect depends on the peptide, solvent, concentration, and freezing rate. Many laboratory protocols therefore recommend single-use aliquots instead of repeated refreezing.
Allow the sealed vial to reach room temperature before opening to reduce condensation. Use a suitable solvent and gentle mixing rather than vigorous agitation. Follow the supplier's solubility information when available.